Support Forum

Archiv:
 
  • Cleaning Digitally Printed Front Panel

    Hello,

    We just received our front panel in the mail and the quality of the machining and digital printing is absolutely perfect. We're in the process of developing general cleaning instructions for our system and we are wondering if it is ok to quickly wipe the anodized/printed aluminum surface clean with a 70% Isopropyl Alcohol solution? I believe the anodizing would be fine, so I am more concerned about whether or not the printing could hold up to the alcohol. If not, can you please provide other cleaning suggestions?

    Thank you,

    Jim Neumann

    Posted By: Jim Neumann on May 01, 2017 04:51PM Category: Production

  • Holes in the corners equidistant from the edges.

    Is there a way to put holes in the corners equidistant from the edges?

    Posted By: David Clarke on Apr 27, 2017 04:46AM Category: Front Panel Designer

  • On/Off Symbol (macro?)

    Does anyone have a universal on/off symbol they can share? I'm referring to the symbol that looks like a semi-circle with the gap at the top and a short vertical line bisecting that gap. I imagine the symbol would be maintained as a macro, but if anyone has it in any form suitable for use with FPD I'd certainly be grateful.

    Regards,
    Scott

    Posted By: Scott Leventhal on Apr 14, 2017 10:55PM Category: Front Panel Designer

  • Mounting Flange spacing and sizing

    is there a feature where Standard rack sides cutouts sizing and dimension on the panel can be applied in your software ? ( Look at the uploaded file for more clarification.

    Attached File: Ask_In_FPD_Fourm.PNG

    Posted By: Mohammed on Feb 14, 2017 05:52PM Category: Front Panel Designer

  • Manufacturing Process

    Hello there,
    My current stage: 19" 2U panel,Aluminum Powder-Coated( Jet Black) with a number of holes.
    The question is : do you make the holes first before coating the panel or is it the opposite? in other words do I have to make larger holes to account for the coatings?

    Posted By: Mohammed on Feb 09, 2017 05:11PM Category: Production

  • Folded Panels

    Can I get panels folded?

    I am working on a project where I need some panels (8.5 x 11) folded in half at a 90 degree angle. I attached a picture of what I'm trying to do.

    Attached File: NW_DonGarber-1230x832.jpg

    Posted By: Mark Still on Feb 01, 2017 08:35PM Category: Production

Please enter your message:

* = required field

  •   
  •   
 
  
Facebook Linked In Youtube Google+