Support Forum

Archiv:
 
  • Slot tolerances

    I want to cut a 4 x 20mm slot, 3mm deep, in a 4mm thick anodized panel (which is 60 x 85mm). Into this slot I want to slide (and later bond) a 4 x 20 x135mm anodized panel, so that this thin panel will be perpendicular to the 60x85mm panel.

     

    My question concerns the tolerances of the slot and 4mm stock thickness. I was planning on making the 4x20mm slot 4.06 x 42.0 mm (with 0 radius corners); should the 4.06mm width be sufficient for the 4mm thick stock?

     

    Thanks.

    Posted By: rjones on Jul 22, 2013 04:31AM Category: Production

  • anodizing customer supplied panels

    Hi I am wondering if you will anodize a raw aluminum panel I send in for milling and engraving. If so how do I compute the charge...or can you just send me an additional bill.

     

    Also, the raw aluminum currently has a lightly brushed finish. I don't care if the brushed aspect of it will be lost, just wanted to mention in case it can't be anodized if it's already brushed.

     

    Thanks

    Phil

    Posted By: willamp on Jul 13, 2013 04:02PM Category: Production

  • Printing Problems

    When I try to print to 100% size on panels that require more than one sheet of paper FPE will only print the first page. It will not tile print. Sometimes it will not even show a preview and tell me zero pages required. This is recent and only started happening when I updated to the latest version.

    Posted By: Blackdog on Jul 11, 2013 03:43PM Category: Front Panel Designer

  • how to generate a macro

    hello,

    I am trying to generate a macro or set of macros for TYCO CPC connectors. I do not see a clear description of how you go about doing this.

    Posted By: tescalmike on Jun 27, 2013 07:08PM Category: Front Panel Designer

  • how to generate a macro

    hello,

    I am trying to generate a macro or set of macros for TYCO CPC connectors. I do not see a clear description of how you go about doing this.

    Posted By: tescalmike on Jun 27, 2013 05:50PM Category: Front Panel Designer

  • Studs and Standoffs

    I can only find M3 Studs or Stand-offs in the Drop down.

     

    Is a M2 Standoff available

     

    The 4.20 software release notes talks about other standoffs coming in June 2013 . . . since it is the end of June are they coming soon ?

     

     

    Posted By: vulcanski on Jun 27, 2013 02:50AM Category: Front Panel Designer

Please enter your message:

* = required field

  •   
  •   
 
  
Facebook Linked In Youtube Google+