Should the width of the side panels be the same as the cover panels?
I ask because in the templates the cover width,(top+bottom) is 85.80mm and the side panel width,(front+back) is 100mm
Using profile2 for the enclosure templates.
I need to adjust the top+bottom width to 70.mm
So should I adjust the front+back panels width to 70mm?
Or should it be 84.2mm? to make up the 14.2mm difference?
Posted By: Ray Sleeper on Sep 18, 2010 08:14AM Category: Front Panel Designer
Thank you for contacting us regarding out Side Profile extrusions.
The cover panels should be 14.2mm narrower than the side panels. This is consistent with the dimensions found in the template.
I would always start by drawing the side panels to the dimensions you need, then reduce the cover panels accordingly.
Since you would like the top and bottom (cover panels) to be 70mm wide, you are correct in your calculation that you will want the front and back (side panels) to be 84.2mm.
Designing the first enclosure is always the toughest, let us know if we can be of any additional assistance.
Posted By: Paul Birkeland on Sep 20, 2010 06:22PMReply
Posted By: Paul Birkeland on Sep 20, 2010 07:19PMReply
Thats kinda what I figured, just wanted to be sure.
Posted By: Ray Sleeper on Sep 21, 2010 09:50PMReply
I am trying to build a rack mount enclosure that is about 20 inches long and I am working on the front panel now. How do I make the side and back panels to fit without using a template because none of the templates fit the size that I need?
Posted By: Emily Gidcumb on Aug 30, 2010 08:44PM Category: Front Panel Designer
It is possible to incorporate a logo in JPG format to the designs of my panels?
Posted By: Josep Lopez on Aug 22, 2010 11:35PM Category: Front Panel Designer
It is indeed possible to add logos in Front Panel Designer, but they must be converted into vector-based files.
Here is a reasonable online tutorial for converting pixel based images to plt vector files that can be directly imported.
This document is a useful supplement if you intend to follow the directions above:
Of course, you are more than welcome to e-mail us your logo file, and we can let you know the associated costs of having us convert it for you.
Many thanks for your inquiry.
Posted By: Paul Birkeland on Aug 23, 2010 08:56PMReply
In previous version, it was possible to set the default location for saved files. I'd like to see this back.
Also the Recent Files header is a bit sloppy. Why not put recently opened files directly at the bottom like most other software.
Posted By: Dan Santoni on Aug 17, 2010 01:22PM Category: Whishes
Thank you for the feedback concerning our software. I will forward your comments along to our software engineers.
I would mention, however, that the intention of the modifications to the "Recent Files" menu selection was intended to allow for a longer history of opened files without making the "File" drop down menu super long.
Posted By: Paul Birkeland on Aug 18, 2010 07:29PMReply
I can understand why the Recent Files was done the way it is. However, it is more unwieldy than just having them visible. A limit could also be set by the user.
Posted By: Dan Santoni on Aug 18, 2010 09:30PMReply
would it be possible to add white to the color selection. i sure would appreciate it.
Posted By: Randy Humbert on Aug 13, 2010 04:15PM Category: Front Panel Designer
Thank you for contacting us concerning our materials.
Currently, there is no process available to make white anodized aluminum. We do, however, plan to offer powder coating in the near future. As white anodizing is currently impossible, it seems reasonable to expect that white will be one of the first choices available.
Also, depending on your needs, we may be able to recommend certain plastics that are also white. Feel free to give us a call to discuss these options.
Posted By: Paul Birkeland on Aug 13, 2010 05:09PMReply