a error occur,“Application exception, unknown software exception（0x0eedfade），address is 0x7c812afb”
when I install completed and run it...system give me above message...not only on my machine,also on other people's machine..
how can I resolve this problem?
Posted By: YuLiang Hua on Oct 24, 2009 06:32AM Category: Front Panel Designer
I'll forward this to our IT people. Can you give me more details about your operating system?
We are sorry for the inconvenience and let you know as soon as we have news.
Posted By: Diane Haensel on Oct 26, 2009 04:55PMReply
I need a cross over program so I can run Front Panel Express designer or a program that will work like it. Hopefully one that is free.
Can Anyone point me in the right direction for something that would work on my Powerbook G4 running 10.4.11 ? Thanks
Posted By: Andy Bowenkamp on Oct 14, 2009 04:05AM Category: Front Panel Designer
Does anyone know if there are library or macro objects available for EDAC connectors, mainly 56 and 90?
Posted By: Greg Loskorn on Sep 24, 2009 01:00AM Category: Front Panel Designer
Here is a usable example of the 56 and 90 pin connectors
Posted By: Leland Savage on Sep 24, 2009 08:29PMReply
Sorry for the tardy reply, I thought if I checked "watch thread" that I would get an email when a reply was posted. Anyway, thanks for the examples.
I have a question, what are the horizontal cutouts through the middle of each connector? It looks like they may be cutouts for the connector alignment pins if you were to mount them behind the panel, but they won't work that way. Just curious.
Posted By: Greg Loskorn on Oct 07, 2009 03:40PMReply
The 56 and 90 pin EDAC connector dimensions were followed by a standarded set of dimensions from the EDAC website. Attached is the link for the 56 & 90 pin connector dimensions on page 91.
Posted By: Leland Savage on Oct 10, 2009 02:50AMReply
it would be great if there was an option for L shaped panels that allowed for easy design including radius and reverse radius corners without using cutouts and curved slots.
Posted By: Craig Winnerman on Aug 05, 2009 10:47PM Category: Whishes
This is already implemented in the next version of Front Panel Designer.
The release date is not final yet but should be finalized soon. Please check back on our website for news.
Posted By: Diane Haensel on Aug 10, 2009 06:56AMReply
it would be great if there was a, for lack of better terms, a dashed line option. This way you could mark the actual opening of the cutout beneath the panel that it would be covering like on a dash panel and allow for proper overhang for mounting. The dashed line would only be used for design purposes and give the designer easy reference to true dimensions they have to work with.
Posted By: Craig Winnerman on Aug 05, 2009 10:46PM Category: Whishes
Wouldn't it be even better to have a more complex library for all kinds of standard connectors with such a dashed line option?
I'll let our software developers know. Thank you for your suggestion.
Posted By: Diane Haensel on Aug 10, 2009 07:05AMReply
I think what Craig Winnerman is asking for is a "Construction Layer". I have used this many times in other drawing packages. It is very helpful when you need to represent a mating part (for fit, etc), but don't want the construction layer actually fabricated.
Posted By: DAVE DAVIS on Dec 14, 2009 11:47PMReply
it would be great if there were to ruler functions. One being a ruler along the X and Y that you could select to view and set to decimal, milimeter or fractions.
Another would me a measuring function from one point to another. Example-select ruler, click on one point and pull to other point and click. It would give measurement of distance in decimal, milimeter or fraction between the 2 points.
Posted By: Craig Winnerman on Aug 05, 2009 10:41PM Category: Whishes
Thank you for your suggestion. We will definitively take the ruler in consideration for future Front Panel Designer versions.
The next version will have the option to make positioning easier by offering a snap tool. It is also planned to enter the distance between two objects by using the snap feature.
Posted By: Diane Haensel on Aug 10, 2009 06:46AMReply
FPD really needs this feature, particularly a way to set the distance between two objects.
You said "The next version will have the option to make positioning easier by offering a snap tool. It is also planned to enter the distance between two objects by using the snap feature."
A new version (4.21) has recently been released and I still don't see this feature. When do you plan to add it?
Posted By: edward on Jun 20, 2013 03:42AMReply
I am sorry that the ruler didn't make it in the last release. Definitely our oversight. It is back on the to-do list.
If it helps in any way, you can place the origin with the snap function on any object you like. Then select the related object and read/change x and y in the 'object property window'
Posted By: DianeHaensel on Jun 25, 2013 02:00AMReply