Support Forum

Archiv:
 
  • cavities

    If I place a large cavity on the front side and a smaller cavity inside it on the back side, the back side cavity is not visible on the drawing.

    Also, the instructions to globally change to inch units do not seem to work

    Posted By: Clark Hamilton on Jun 15, 2016 11:46PM Category: Front Panel Designer

  • Keyboard Not Functioning Correctly

    Gentleones,

    I cannot use "M" to set coordinates manually, I cannot use "1"-"4" to select the snap mode, and I cannot use the number pad keys to set the origin.

    Other keys work: "A" selects the ruler, "space" clears the tool, Shift-G makes a group, and so on.

    I have tried booting in "safe boot" mode and the problem persists.

    I'm using FPD v4.5.1 and OS X 10.11.5.

    This problem makes the program unusable.

    Thanks,
    Bill

    Posted By: Bill Eccles on May 25, 2016 06:31PM Category: Front Panel Designer

  • Some Keyboard Functions Not Working

    Gentleones,

    I cannot use "M" to set coordinates manually, I cannot use "1"-"4" to select the snap mode, and I cannot use the number pad keys to set the origin.

    Other keys work: "A" selects the ruler, "space" clears the tool, Shift-G makes a group, and so on.

    I'm using FPD v4.5.1 and OS X 10.11.5.

    This problem makes the program unusable.

    Thanks,
    Bill

    Posted By: Bill Eccles on May 25, 2016 06:30PM Category: Front Panel Designer

  • Orientation for side machining

    Hello. For side machining, I assume that in the side file, the upper edge always corresponds to the front surface of the panel in the main file. Therefore, for the upper side edge of the panel, the origin in the side file would be located at the upper right corner on the bottom surface in the main panel. Is this correct? Thank you.

    Posted By: Dan on May 20, 2016 08:10PM Category: Front Panel Designer

  • how to backup Frontdesign user macros

    Having done several windows reloads and lost FrontDesign User Macros, I have found the macro location for backup.


    navigate to:

    control panel / appearance and personalization / file folder options / show hidden files and folders /

    , >select< show hidden files, folders and drives
    , >unselect< hide protected operating system files
    and >unselect< hide extensions for known file types.

    then ether navigate to:

    C:Users>yournameyournameyournameyourname< with your name or login id, specifically.

    Attached File: FrontDesign_USER_MACRO_LOCATION.txt

    Posted By: Robert on May 19, 2016 03:40PM Category: Front Panel Designer

  • Windows Installation

    each time I try to upgrade the installation fails.

    Posted By: Scott Smith on May 10, 2016 02:13PM Category: Front Panel Designer

Please enter your message:

* = required field

  •   
  •   
 
  
Facebook Linked In Youtube Google+