In an attempt to import a dxf file I get the following message:
"An unhandled exception occurred..."
I use Windows XP 32bit
Can you help me? Thanx
Posted By: winston67 on Mar 08, 2013 11:15AM Category: Front Panel Designer
My guess is that it is the dxf file itself. Can you please email both the dxf and the fpd file to my attention to email@example.com
I will have a look as soon as you get a chance to send it to me.
Posted By: DianeHaensel on Mar 08, 2013 08:51PMReply
I installed using the 64bit .deb package with no errors.
When i click the icon in start menu it dosen't start.
I don't get any error messages or an hour glass, just nothing.
Posted By: acidblue on Mar 08, 2013 03:59AM Category: Front Panel Designer
I informed our IT people. They might have some more questions to reproduce the issue. I will let you know.
I am sorry for the inconvenience. I hope we can get this resolved for you quickly.
Posted By: DianeHaensel on Mar 08, 2013 08:56PMReply
Tried starting form termial, but kept getting "command not found"
Not sure what I should be typing into the terminal>
FrontPanelDesigner, frontpanel and a few others I tried.
All gave the above error.
Posted By: acidblue on Mar 08, 2013 11:30PMReply
Ok I tried frontdesign in a terminal and got this error:
frontdesign: error while loading shared libraries: libjpeg.so.62: cannot open shared object file: No such file or directory
So I installed libjpeg62,(I think thats what it was called), and now it starts.
I'll kick the tires and post back if any more problems occur.
Posted By: acidblue on Mar 10, 2013 06:51AMReply
Thank you for your patience with Front Panel Designer. I am glad you got it to work.
And thanks for the details, much appreciated by out IT people.
Posted By: DianeHaensel on Mar 11, 2013 05:58PMReply
Hello, I have all of my front panel cutouts drawn in a cad program and would like to import them directly in Front Panel Designer 4.14 for MacOS (instead of re-drawing them in FPD), but I'm confused as to which cutting tool to select in the Free Contour Properties window. I would think I should select a cutter tool that is at least as thick as my panel (3.0mm) since I want cutouts and not cavities, but when I do that many of the cutouts disappear. If I select a smaller cutting tool then all of the cutouts show up. Which is correct? Thanks.
Posted By: Gregory on Mar 08, 2013 02:46AM Category: Front Panel Designer
The bigger the tool the better. This will reflect in pricing since a bigger tool requires less milling time.
However, some of your imported objects may not allow a 3mm tool diameter and therefore won't be milled (and not shown in the Designer.) Examples are smaller drill holes or cutouts with small corner radii.
The whole import can become expensive when you choose the smallest tool diameter with 1mm. I recommend to do two or more imports, one for each appropriate tool.
Don't worry about the material thickness for tool selection. Just go by geometry.
I hope that helps. You can also email (firstname.lastname@example.org) us your fpd file and have us optimize it for you.
Posted By: DianeHaensel on Mar 08, 2013 08:45PMReply
Posted By: Gregory on Mar 15, 2013 08:25PMReply
I am planning on sending down some panels to be engraved.
However one of them is not flat. It is a channel, with the engraving on the flat broad surface. Is this possible or can you only engrave flat panels.
What is the procedure for using my own material?
Posted By: Blackdog on Mar 04, 2013 10:13PM Category: Production
We can engrave your supplied material as long as we can hold it on our machines securely.
Do you have a picture of the part? That would help me to give you a better answer.
Please have a look at this newsletter about customer supplied material. It gives you step-by-step instructions on how to provide your own material.
Posted By: DianeHaensel on Mar 07, 2013 02:17AMReply
I am new to this and was going to ask how to revise an existing design to remove holes. After posting, I figured it out. So I am deleting my question, but apparently the post can't be removed. Sorry.
Posted By: F.W.Bray on Feb 23, 2013 11:30PM Category: Front Panel Designer
Why is the DXF exported file in inches when it was drawn in millimeters?
A Panel I laid out is 80mmx107mm, when exported to DXF it is 80in x 107in
Posted By: R_Phoenix on Feb 16, 2013 05:10PM Category: Front Panel Designer