I can only find M3 Studs or Stand-offs in the Drop down.
Is a M2 Standoff available
The 4.20 software release notes talks about other standoffs coming in June 2013 . . . since it is the end of June are they coming soon ?
Posted By: vulcanski on Jun 27, 2013 02:50AM Category: Front Panel Designer
We received #4-40 and #6-32 studs and standoffs. We are currently in the process of preparing everything for a new Front Panel Designer update. Still two more days ;-)
You can already order it if you like and leave us notes about diameter and length.
Here is what will be available in addition to M3:
Stud #4-40 length: 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
Stud #6-32 length: 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
Standoff #4-40 length: 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
Standoff #6-32 length: 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
M2 is not planned at this time.
Thank you for your patience.
Posted By: DianeHaensel on Jun 27, 2013 03:28AMReply
I have been trying for 3 days to import dxf files defining 2 panels. Each file appears to have different, yet related, errors preventing the upload from completing, and no amount of editing changes the errors. Please help.
Posted By: DPutman on Jun 24, 2013 02:51PM Category: Front Panel Designer
I am sorry that you have difficulties with the import. Why don't you email me the dxf files and have me find the problem? Please send to my attention at email@example.com
Posted By: DianeHaensel on Jun 25, 2013 01:52AMReply
I am having a very similar problem importing a dxf file. I continue to get "an error occurred. The DXF file could not be imported" messages.
May I send you my own problem dxf file?
Posted By: bhjazz on Jun 26, 2013 06:18AMReply
Of course Brian. Most of the time it is just a doubled line or a contour that is not closed. I am happy to check it out for you.
Posted By: DianeHaensel on Jun 26, 2013 11:09PMReply
I would like to use FPD for it's font support but I cannot figure out how to import my dwg. Yes, I can import the DXF as a free contour but the holes become contours. I'm not bothered that much by the difference in price but I am concerned that milling vs drilling will not produce the best possible part quality. Is there a way to convert .dwg or .dxf to .fpd so that circle entities become holes. Minus text engravings and the 4 oblong 1U mounting holes, my project is just 40+ holes ranging from 3mm to 3/8" so I think it should be drilled.
Posted By: ioplex on Jun 14, 2013 07:26PM Category: Front Panel Designer
We don't use drills. Everything gets milled with end mills. The result is the same, considering our tolerances of +/-.1mm
I am not sure if I understand what you mean by circle entities become holes. Feel free to send us your designs (both fpd and dxf) to firstname.lastname@example.org. We can have a look and convert your dwg/dxf into fpd in the most efficient way.
Posted By: DianeHaensel on Jun 17, 2013 09:32PMReply
I need a panel for a Pelican 1400 case with a Pelican panel ring installed.
I assume this has been done many times, but a forum search on Pelican 1400 got not hits
Does anybody have the front panel outline with 10 ea 6-32 holes for fasteners
That they can share?
I also need library items for Neutrik panel mount jacks, BNC connectors, USB B panel mount jack, and switchcraft power jack.
Posted By: email@example.com on Jun 14, 2013 02:39AM Category: Front Panel Designer
Pelican offers drawings for their cases. Have you looked here?
We have a few connectors in FPD's library. You can always add your own. Most suppliers offer cutout specs for their components.
I hope that helps.
Posted By: DianeHaensel on Jun 25, 2013 02:13AMReply
I just installed v4.2. Opened a file and modified it. I saved the file, and closed it. Now when I try to open it I get a file is corrupt error. It has happened on three files in total now.
Posted By: Blackdog on May 22, 2013 05:05AM Category: Front Panel Designer
I am having the same problem. Has happened with 4 files already. Program does not seem to be as stable. Crashed a number of times. Getting exception errors. Coping and pasting not working with groupings.
Posted By: muskyhuntr on May 22, 2013 12:21PMReply
Posted By: muskyhuntr on May 22, 2013 01:22PMReply
The release package had a bug. We uploaded Front Panel Designer v4.2.1 with the necessary fixes.
Please download FPD again.
We are very sorry for the inconvenience.
Posted By: DianeHaensel on May 22, 2013 07:08PMReply
I have downloaded the v4.2.1 and the problem seems to be solved.
Posted By: muskyhuntr on May 22, 2013 08:16PMReply
4.2.1 seems to be fine.
Thanks, it's all working again
Posted By: Blackdog on May 23, 2013 05:21AMReply
I have a panel (steel) which has a 2.5mm lip on the top and bottom running the length of the panel. Is it possible to do any engraving on this panel, or does the lip keep the tools from correctly reaching the panels? (as in: do I really need to use a flat panel?)
Posted By: bhjazz on May 07, 2013 05:24AM Category: Production
Look at this thread. Panels with lips are no problem at all. We can mill on almost any part as long as it can be held on our machines.
However, steel is a problem. The spindles of our machines can only handle non-ferrous material like aluminum, brass, copper, etc.
Posted By: DianeHaensel on May 07, 2013 06:14PMReply
Thanks for the information, Diane. I appreciate it. I'll get with my client and suggest aluminum as a replacement.
Have a great day!
Posted By: bhjazz on May 08, 2013 06:14AMReply