If I create a circle cavity, what color will it be in the middle?? Can I specify a color to fill the cavity??
Posted By: Jarred matyka on Jun 23, 2011 06:08AM Category: Front Panel Designer
Thank you for contacting us regarding cavities and engravings.
A cavity will always be raw aluminum in the middle unless you have a powder coated panel and you request that we powder coat over the cavity.
In order to get a filled cavity, you would need to use an engraving object. Select the appropriate shape and size, then check the "Fill Area" box to make it solid.
If you have a more unusual shape, feel free to let us know and we can give you more specific tips or hints on how to design it within our software.
Posted By: Paul Birkeland on Jun 23, 2011 05:56PMReply
I'm entirely new to FPE and had a tiny question. Could you please give me an example of a cavity?A pic would be nice.
I have an LCD(50*40)mm which I need to put in a FP. The only way to hold the LCD in place is to create a cavity on the reverse side of the FP. This allows it to stay in place. I still have to support it from the reverse side, but I can take care of that.
Will a cavity do such a thing?
Posted By: Gerry S on Jun 18, 2011 08:05PM Category: Front Panel Designer
Thank you for contacting us regarding cavities. Below is a photograph of a cavity placed on the front side of a panel with a rectangular hole placed in the middle, along with four through holes.
(Click to enlarge)
Let us know if we can provide any additional assistance.
Customer Service Manager
Posted By: Paul Birkeland on Jun 22, 2011 11:10PMReply
Thanks Paul, but the image link does not work. Must have expired.
Posted By: Gerry S on Jul 21, 2011 03:30AMReply
Thanks Paul, but the image link does not work. Must have expired.
The link should be back in working order.
Posted By: P Neumann on Jul 27, 2011 12:48AMReply
It would be a nice feature to add the option for breaking sharp edges on panels.
Some of the enclosures I have built, have caused some nasty cuts due to the razor sharp edges of the panels.
This option could be added under the material selection.
Currently the only way to do this is by verbal request.
Posted By: Terry Best on Jun 02, 2011 05:59PM Category: Whishes
Thank you for contacting us regarding our materials.
We are currently working to integrate such options into our software, but for now notes can be left in the Remarks for Production section of the front panel properties.
The services we offer to break edges are:
1. Sanded edges: This is $3 per panel, and the sanding process not only breaks the edges, but also removes the vertical lines and shininess from the edges.
2. 45 degree bevel: We can mill a 45 degree bevel around the perimeter of the front, back, or front and back of a panel. Pricing for this is calculated manually after order submission.
3. Round over: We can also round over the edges of a panel. This service is added and the costs applied after ordering.
If we can provide any additional assistance, please do not hesitate to let us know.
Posted By: Paul Birkeland on Jun 02, 2011 06:09PMReply
I have some extruded heatsinks, to which I would like to screw-mount some transistors. Is your equipment capable of tapping one of these?
Posted By: Douglas Krause on May 19, 2011 02:02PM Category: Front Panel Designer
Thank you for contacting us regarding your inquiry.
We are absolutely able to tap those heatsinks.
You need only to make a drawing in our software with the exterior dimensions of the heatsink and marked to be milled from customer provided material that has the desired tapped holes.
Also be sure to remember to make the origin on the heatsink to ensure accuracy.
As always, let us know if you have any additional questions or concerns.
Posted By: Paul Birkeland on May 19, 2011 06:42PMReply
For a customer supplied panel, what is the preferred method of including some sort of registration mark on the designed panel to aid in checking the layout?
For example, I have a panel that already has screw holes. I'd like to include these in the panel layout so that when the page is printed I can use that to align the printout with the panel to make sure things are lining up. But this is not a set of holes to be drilled when the panel is fab'd by you.
Posted By: Ron Wagner on May 14, 2011 01:59AM Category: Front Panel Designer
Thank you for contacting us regarding customer provided material.
The preferred method of marking the origin is to use blue painters tape to indicate the corner that aligns with the origin on your drawings, then also to write the file name on that blue piece of tape to avoid confusion.
As far as the screw holes go, it is better to remove those holes before submitting your order, as the price for milling them will be included in the design, and we will end up contacting you and placing your order on hold because of the duplicate elements.
If we can provide any additional assistance, please do not hesitate to ask.
Posted By: Paul Birkeland on May 16, 2011 11:42PMReply
About to design an enclosure with you, and wanted to check if two things were possible. Basically I really like these enclosures (http://atechfabrication.com/HTPC_cases.htm#Storage,_NAS,_and_Server_Cases) and would like to make something as close as possible... Sadly the manufacturer is unwilling to do one offs at different sizes! So I'm going to go to side profile 2 with you guys.
So question 1 is whether there's any way to attach the front panel with concealed fastenings, rather than bolts through the whole front panel.
Question 2 is whether there's any way to specify more of a heatsink style side profile for the case. Which isn't just for looks, actually, the components I'm using will be throwing off a lot of heat and I'd rather avoid needing to put a fan in the case...
While I'm about it, Question 3 would be whether I can specify side profiles in different color anodized aluminum, or whether they have always to be natural.
Thanks for any help you can give me,
Posted By: Magnus Blair on May 06, 2011 09:20PM Category: Production
Thank you for contacting us with your questions.
You can indeed attach a front panel without seeing the fasteners.
What you would need to do is to create a completely flush 2.5mm thick front panel, then create a thicker (6.0mm or thicker) second front panel. Place a cavity on the back side of this thick panel that is just slightly larger than the smaller front panel. Use blind holes on the back of this thick panel, then mount the two panels together from the inside of the enclosure.
We do have a sample here of a panel inset within a panel, and I can e-mail you pictures if that would be helpful.
As far as heatsinks go, there are heatsink profiles available with integral mounting holes, though the offerings are diverse enough that special ordering is recommended.
Regarding color choices, our extrusions come in natural anodized or black anodized finishes. We are also available to drop ship these extrusions to your choice of anodizer to have them refinished to a color of your liking.
Also, for now, we are not offering powder coated extrusions.
If we can be of any additional assistance, please let us know.
Posted By: Paul Birkeland on May 07, 2011 01:52AMReply
Thanks Paul for your prompt reply. Genius suggestion; should probably have thought of that! I have just placed an order with you for something designed along precisely those lines (Order #126590). Think I got everything right, but would love it if maybe you could check it to make sure before the CNC mill gets milling.
Posted By: Magnus Blair on May 10, 2011 04:44AMReply