Support Forum

  • Resizing panel after designed

    I have a panel layout that I have finished. but realized it is not the correct size. I want to keep the designed exactly as it is on the panel. just extend each side slightly. every time i re size the panel it just adds the added length to one side of the panel. is there a way to center justify it keeping the layout centered??

    Posted By: Dave Meyers on Apr 27, 2011 04:07AM Category: Front Panel Designer

  • Bugs in Mac FPD

    Just wanted to pass along a few bugs that exist in the mac version of the FPD software. This is regarding version 4.11, the intel version, and I'm running it on a 2007 macbook running os x 10.6.7.


    The mouse scroll wheel behavior is settable via the edit>settings>interface menu, but the setting does not stick outside of the current session as it should. Currently I need to reset this setting to my preferred setting - scroll wheel scrolling the file rather than zooming it - every time I run the software. There should be a way to make a users choice of this setting a default setting.


    Changing the fill color in hpgl engravings doesn't change them - they always revert to whatever they were originally. I have to reopen the file in a windows based version of FPD to change it and have the change stick.



    Ordering - currently there is no way to order more than one panel design in a single order. Although there are slots for this in the order window, there is no way (that I've found) of adding other panels.


    Hopefully these can get passed on to whoever can fix these bugs - thanks!

    Posted By: Stephen Drake on Apr 14, 2011 02:03AM Category: Front Panel Designer

  • Beveled Oval Slot

    I wish to make an oval shaped slot that has beveled edges. how can i do that?


    So for example I want a .5" wide by 2" long oval slot with a 45 degree bevel on the inside edge. (not actual dimensions just for example)

    Posted By: Dave Meyers on Apr 04, 2011 01:57AM Category: Front Panel Designer

  • Uncertain Thickness of Panel

    I will be sending in my own panels for machining, however I am unsure as to how thick I should state they are in the FPE software.


    The panels have "flanges" along their "circumference," used for mounting the side and top panels to the front and rear panels. Think of these as angle brackets which are permanently welded to the panel.


    Further, the panels have actually been milled so that the bulk of the area is thinned out even further. This picture should (I hope) demonstrate what I mean:





    All cutting would be in the thinned area only.


    Given the thinned part is 4mm thick, the panel proper is 8mm thick, and the panel + flanges is 12mm high when laid on its back, which number should I put into the software?


    I would guess 4mm, since this is the thickness to be cut. However, I am uncertain of how the cnc software actually works, if it is concerned with the thickness to be cut, or the total height of the total piece of metal.




    I hope this all makes sense, it is rather confusing :( I am happy to clarify anything and everything.

    Posted By: Douglas Krause on Apr 03, 2011 10:06PM Category: Front Panel Designer

  • White macro text is not visible in preview

    I have several macros that I use quite often that are just text.


    Part Number

    Cage Code

    Company Name

    Serial #


    The text is engraved with a white fill color.

    Since the background color for the Macro Preview window is white, the macro is not visible in the preview, except the insertion points.


    If text = white, then text in preview should = black.



    Posted By: Terry Best on Mar 30, 2011 03:57PM Category: Whishes

  • Selection line engraving


    How can I select a line engraving not by the middle but by the left ou right corner. It's for join two line with 90°

    In the older release, it's is possible.


    Posted By: NOËL François on Mar 13, 2011 10:08AM Category: Front Panel Designer

Please enter your message:

* = required field

Facebook Linked In Youtube Google+