Hi, just upgraded and stupidly overwrote my older working version in a desire to finally be able to import a DXF file from illustrator, a seemingly impossible task.
Anyway, I downloaded the latest version for intel macs, and it won't open at all, giving me the following error:
"FrontDesign" can't be opened because the identity of the developer cannot be confirmed...
OSX 10.9.5, 2.4ghz core 2 duo
I'm working with this software and this just shut me down for the day(s).
Posted By: Dobart on Oct 06, 2014 06:52PM Category: Front Panel Designer
Thank you for your bug report. I just emailed you installation packages from older versions.
We are aware of this problem and are working on a new release that will also solve a couple on Linux issues.
I apologize for the inconvenience.
Posted By: DianeHaensel on Oct 06, 2014 09:23PMReply
I got the new version working! Had to change security settings in my shiny new OS, but then I was able to import an illustrator DXF without problems.
Thank you for your help!
Posted By: Dobart on Oct 06, 2014 10:48PMReply
Quick way to launch latest (4.4) OSX version of FrontDesign:
1. Locate FrontDesign in finder
2. Ctrl-click or right-click FrontDesign
3. Click open
4. The dialog you are presented with will now contain an 'open' button.
5. Click Open. This now adds the app to your security exceptions so you don't have to use finder to launch it again.
Posted By: squeedee on Oct 08, 2014 06:35PMReply
I wanted to order a few frontpanels but the program has the currency set to u.s. dollars.
So far not a big problem but when I enter my address it tells me there is not shipping possible???
I had this problem before on my laptop and I use my desktop to order then but after a reinstall it's on both my computers :(
I live in the Netherlands and in the settings in Windows it also says Netherlands.
I'm using Windows 8.1.
Posted By: riktwi on Sep 19, 2014 04:59PM Category: Ordering
Ah problem found.
I didn't order from you but from schaeffer, a german based company.
If I download the program from their website it's in euro's and they can ship to me.
Both programs are exactly thesame except a small logo, quite confusing.
Posted By: riktwi on Sep 19, 2014 05:06PMReply
Sorry for the confusion.
Schaeffer AG and Front Panel Express are sister companies. Schaeffer serves the European and Front Panel Express the American market.
Front Panel Designer is exactly the same for both companies besides the ordering program. Thank you for pointing out that this is apparently not quite obvious and the download page needs to be more specific.
Posted By: DianeHaensel on Sep 19, 2014 10:17PMReply
When I print in outline mode at first I thought it was a blank page until I looked really close, then I could see the incredibly fine lines of the outline. Way too fine to be usable. Is there any way to thicken those even a little?
Update: I turned off economode and got very fine lines, but at least I could see them. Enough to do a trial fit cutout.
And of course can print in non-wire mode, using the panel color as the guide.
Posted By: STMRadio on Sep 16, 2014 05:45PM Category: Front Panel Designer
I can't reproduce this but will check with IT. I guess it is a printer setup issue but will let you know for sure when I know more.
Thank you for reporting this to us.
Posted By: DianeHaensel on Sep 17, 2014 10:29PMReply
Hi all people
I am new here on this forum and also new Front panel designer user.
First I would ask where I can find the tool to make on my front panel a scale for pots. same kind of engraving and painting as text.
Maybe there isn´t such a tool, or macro.. what ever it needs.
It would be nice to have scale with numbers from 0 to 10 or just lines surrounding the knobs.
Posted By: Eki_Electronic on Sep 09, 2014 08:35PM Category: Front Panel Designer
Hi, my 6mm thick panel has a large cavity that is about 5mm deep. I would like to place some 2-56 tapped holes in the cavity, which will only pass through the remaining ~1mm of material at the bottom of the cavity. However, FPD still thinks that the material is 6mm thick and will only let me tap a blind hole, 5.8mm deep. Is there any way to convince the program that the material is only 1mm thick at the location of these holes, so that it can tap them thru? The same restriction applies to regular holes less than 2mm diameter.
Posted By: Mwalker on Sep 03, 2014 07:08PM Category: Front Panel Designer
You can't modify this in Front Panel Designer. The depth of holes are set by the tool we use to machine them. The tool for your example can only cut to a max depths of 5.8mm. The software doesn't recognize that you already placed a cavity on top of the tapped hole.
However, we can adjust this for you with a small modification of the milling program (usually a fee around $15.) Please leave us a note in "remarks for production" if you want us to make the adjustments.
Posted By: DianeHaensel on Sep 04, 2014 01:30AMReply
:shock: That GREAT! ship 10 panels 4.7kg.
UPS next day air service for -$1
4.4 is not ready for prime time :wink:
Posted By: VTXHOGG on Sep 03, 2014 02:32PM Category: Front Panel Designer
I think that is a great marketing idea. We pay you for allowing us shipping our products to you :wink:
IT already figured it out. It happens when UPS doesn't offer the requested service to the given location. The web service answers with -1 which we mistakenly translated into -$1.
Thank you for pointing this out. We have a temporary fix in place and will have it cleaner with 4.4.1.
Posted By: DianeHaensel on Sep 03, 2014 07:35PMReply