Front Panel Designer category
Does anyone have a cutout template for a D-SUB 9 connector. I tried using the rectangular cutout, adding 10-degree corners but it is clearly not correct. Thanks.
Posted By: John Lauf on Sep 27, 2012 12:34AM Category: Front Panel Designer
We have this cutout in our macro object library.
You can activate the side bar under 'View'-->'Macro Objects'. There you will find a folder named 'SubD-Connector' and the cutout for the 9-pole connector.
Just drag and drop it on your front panel design. It comes grouped with the drill holes but each object can be changed individually after you ungrouped it.
Posted By: Diane Haensel on Sep 28, 2012 01:34AMReply
Thanks very much Diane, I figured there must be a library somewhere but didn't try the 'Macro Objects'. Much appreciated.
Posted By: John Lauf on Sep 28, 2012 02:05AMReply
I am designing a 6RU 19" rack panel. When I add the system holes, four holes appear in the four corners of the panel but I need to add more standard size rack holes on each side. Generally, a 6RU rack panel has four holes on each side and not just two. Ideas on how to add these?
Posted By: Paul Christensen on Sep 10, 2012 01:52PM Category: Front Panel Designer
Front Panel Designer lets you choose from two rack mount panel system suppliers, Schroff and Fischer. Both have two mounting holes on each side of a 6U panel. The additional drill holes are for the handles.
However, you can copy or move everything that is on your design. Those system holes are a template and you can even delete parts of it.
Let me know what spacing you need between the holes. I can help you with the design.
Posted By: Diane Haensel on Sep 11, 2012 02:03AMReply
That worked well. I now have the extra rack holes added.
My rack panel is nearly complete. I did notice that one of my 3" holes will not exactly center in line with the other three. It's off by about one pixel and no amount of movement will get it on the exact center line with the other holes. Does the software have a "snap to" function like some other CADD programs? If not, I'll just start over by deleting, then addding. Many thanks!
Posted By: Paul Christensen on Sep 11, 2012 01:48PMReply
There is a snap on function for new placed objects. But I recommend to activate the 'Object Properties' window. You can find it in the toolbar under 'View'
This will show you all relevant info of an object once selected. The first two entries in the object properties show you the X and Y coordinates. Those can be edited and allow you to align everything to each other perfectly.
Posted By: Diane Haensel on Sep 11, 2012 07:45PMReply
That fixed it perfectly.
One other nagging question. Under panel properties, I have selected a 6RU height standard rack size. I thought that a EIA standard 6RU rack is precisely 19" wide by 10.5" in height. But when selecting the program's pre-determined 6RU height, the panel dimensions are 19.0157" wide and 10.4665" in height. Sure, just a fraction off but is there a reason for this discrepancy? Thanks!
Posted By: Paul Christensen on Sep 12, 2012 03:00PMReply
I believe this may be a correct answer to the question as it relates to EIA RU height, but not the 19" width discrepancy:
"Typically, a piece of equipment being installed has a front panel height 1⁄32 inch (0.031 inches / 0.787 millimetres) less than the allotted number of "Us." Thus, a 1U rackmount computer is not 1.75 inches (44.5 mm) tall but is 1.719 inches (43.7 mm) tall. 2U would be 3.469 inches (88.1 mm) instead of 3.5 inches (88.9 mm). This gap allows a bit of room above and below an installed piece of equipment so it may be removed without binding on the adjacent equipment."
Posted By: Paul Christensen on Sep 13, 2012 02:09AMReply
Is there a recommended minimum spacing to use between rectangular/circular cut outs?
I have a few rectangle cutouts to place next to each other and want to make sure I'm not putting them to close together to avoid any problems during/after cutting.
Posted By: Shaun Ortolano on Sep 08, 2012 05:13PM Category: Front Panel Designer
Also, is there a size limit to how large a panel can be? Is 29" x 9" doable?
Posted By: Shaun Ortolano on Sep 08, 2012 05:19PMReply
I can't give you a clear answer about the spacing. It depends on both the material thickness and the size of the cutouts. In case the cutouts are small, like 25mm (1"), you can place them pretty close to each other. I would recommend something in the area of 2mm (0.08") as remaining material in between. However, when you have longer cutouts, like >100mm (4") with a material thickness of 2mm, I would give it at least 5mm (0.2") in between.
If the cutouts get too long and too close, the remaining material in between starts to vibrate during the machining process. This results in a finish with chatter marks. The good thing is that you don't have to worry about it too much. Each submitted Front Panel Designer file gets checked by us for machinability. We contact you if we see concerns and your order is placed on hold until we are able to go over those concerns with you.
A panel size of 29" x 9" is doable in thicknesses of >2mm. Maybe even in 1.5mm but I would need to see your design to confirm.
In general, the largest panel size that fits on our machines is 46" x 34.25"
Posted By: Diane Haensel on Sep 11, 2012 01:35AMReply
hi, i have a black panel...and i would like to write black text on top of a white box on the panel.
ive made a white box. and the black text. but how do i choose which is going to be printed on top of the other? ie. so how do i choose which goes to the forefront ..where is the "foreground"..."background" setting for the box and text. At the moment i am unable to bring the text to the front. i would not want the panel to come back and there be a blank white box there wit the text hidden underneath
Posted By: Black Out on Aug 18, 2012 05:59PM Category: Front Panel Designer
Graphics in Front Panel Designer work a little different than in other design software.
You can't define layers since the images are not printed. All engravings are on the same layer and you would need to isolate the text from the background with a lip. This ensures that the infill paint of each area doesn't run into an other.
Our logo is a good example for it. Click here to have a look. The letters are embossed and show the aluminum color. Only the background is engraved and infilled with paint.
The last image on this page shows white infilled letters (the word Danger) on a red background. The associated hpgl design includes a lip between the red and white infill area.
More info about hpgl design can be found here.
Please let me know if you need help with your design. We offer a hpgl design service.
Posted By: Diane Haensel on Aug 20, 2012 07:58PMReply
I have an older partial panel that I would like to replace as is. Could I just send that partial panel in to you and have you make me one just like it?
Posted By: Rolf Grandstaff on Aug 14, 2012 03:15PM Category: Front Panel Designer
Yes you can send the partial panel in to us and have us design the Front Panel Designer file for you. We charge an hourly fee of $80 for this service.
Posted By: Diane Haensel on Aug 17, 2012 10:03PMReply
Hi all I do a front panel via Adobe Illustrator and I would want to import in FrontDesign for factoring.
It seems to be not possible !!! does anyone have an experience for Importing ?
Thanks by advance
Posted By: Ritchie Ritchie on Aug 08, 2012 05:59PM Category: Front Panel Designer
You can import dxf and hpgl files.
The hpgl import (file extension plt) is for engravings but can be also used as a design layer to compare your existing Adobe Illustrator file to Front Panel Designer. Check out our tutorial about hpgl imports
I hope that helps.
Posted By: Diane Haensel on Aug 09, 2012 02:18AMReply