Support Forum

Archiv:
 

Front Panel Designer category

  • Feature Request: Prompt to print cart.

    --A prompt to print the shopping cart (with order number) just after placing the order would be nice.

     

    Or perhaps, the instant auto-generated email that is sent by FPE should include a copy of the order.

     

    I realize that the fine sales-folks at FPE do eventually send a confirmation with all the details. It just happens that right at the time of ordering is the most convenient time to staple stuff to our PO (in our very-paper-based office).

    Posted By: Chris Knudsen on Apr 03, 2012 09:59PM Category: Front Panel Designer

  • Small size cable glands

    Hello, please tell me how to make holes with thread, for PG7 and PG9 cable glands.

    Posted By: Zinaida Lyubimova on Mar 26, 2012 08:49PM Category: Front Panel Designer

  • Problems with free contour

    hi, it seems i cant import curves from a dxf file with the free contour feature??

     

    Im making some curves in Ilustrator and export in DXF then with free contour trying to import but i get an error, doesnt tell which error, just an error.

     

    Its weird because with the same ilustrator i make a square or even a star and export it in DXf then import it with the free contour option and it works.

     

    It seems i cant get the curves working, anyone could help me?

    Posted By: david gutierrez on Mar 25, 2012 01:36AM Category: Front Panel Designer

  • How to make this shape

    Hello im wondering how to make this panel shape. I mean the outline.

     

     

     

    Thanks in advance

    Posted By: david gutierrez on Mar 19, 2012 07:23AM Category: Front Panel Designer

  • Rectangle in Rectangle Cavity

    I am designing for material that I plan to supply. The material is ~1.8mm thick and is powder coated. In the Designer Software I have selected 2.00mm thick since it gives an error when I select 1.5mm thick.

     

    I want to make a rectangular hole with a cavity surrounding it with a material thickness of 1.5mm. I assume the "Rectangle in Rectangle" option is the one I want to choose. However, I don't know which depth to specify. Should I select a depth of 0.5mm since I selected the 2.00mm material in the properties? or should I select a depth of 0.3mm since the actual material is 1.8mm?

     

    Edited: 2/23/12

    Posted By: Jason Meeusen on Feb 22, 2012 11:17PM Category: Front Panel Designer

  • 2-Way Radio Mounting Options

    I looked at the enclosure manual; but I'm still not 100% sure what I need to do to make this work.

     

    See the attached image.

     

    What I'm trying to do.. is make a face plate with a rectangle cutout that a CB radio will slide into. The radio has two holes/screws.. one on each side, midway down to secure it to the mounting bracket. Basically I need to make a piece that will attach at a 90 degree angle at the edge of the rectangle cutout on each side of where the radio will mount, to give me a place to put the screw (again, see image attached).

     

    What all do I need to do in the front panel designer to make this work? Just put a blind hole near the cutout? What about hardware, and the actual bracket? Assume it would need to be a bent,or welded L type bracket with a hole to mount?

     

     

    Posted By: Travis Howle on Feb 20, 2012 03:15PM Category: Front Panel Designer

Please enter your message:

* = required field

  •   
  •   
 
  
Facebook Linked In Youtube Google+