I am designing a large panel which is compromised of 2 panels joined together in the middle. I have the entire left half done with all the cut outs done. Some are over the edge and must match perfectly with the other half. Is it possible to mirror the entire left panel to make the right half so it matches up perfectly with left half? Hope that makes sense.
Posted By: Rob A on Nov 24, 2012 04:01PM Category: Front Panel Designer
That must be a large design because our machines can handle 1170 x 870mm.
Front Panel Designer has a mirroring function. You can find it under 'Selection' in the toolbar. You can mirror horizontally or vertically. There are also a couple of options for the mirror axis. I like to mirror around 'Position of mirror axis.' Lets say you have the left side of your panel done and want to mirror it to the right. You want to place the origin of the panel on the right edge, select all the objects, choose mirror, select 'Position of mirror axis', enter '0' and check 'Apply to copy'. Now you can cut and paste the mirrored objects on a second panel.
However, all text will be mirrored too. You can fix that in the object properties (shft+crt+o). Just select all engravings and delete the minus in front of the x-scaling. Tip: make sure your text is aligned to center, otherwise it will take some time to mirror everything back.
I hope that is what you were looking for.
Posted By: Diane Haensel on Nov 26, 2012 08:33AMReply
I need to have a thick panel made with drilled and tapped holes coming in from the side and from the top and bottom.
Also holes on the ends as well. FPD only shows holes on the front. How would I show holes on the ends?
Posted By: Dan Santoni on Nov 09, 2012 03:06PM Category: Front Panel Designer
Please design additional Front Panel Designer files for the sides, bottom and top and select 'customer provided material.'
Please also leave a note for us indicating which side it is and how to set up the part on the machine if not symmetrical.
Posted By: Diane Haensel on Nov 10, 2012 10:07PMReply
I thought that might be the way to do it, but I wanted to be sure.
However why do I click "customer provided material". FPE has material thick enough.
Posted By: Dan Santoni on Nov 11, 2012 03:13PMReply
The material is already paid for with your regular front panel. No need to charge you twice ;-) However the setup of the sides is a little more effort. You can see that in the different amount for preparing and finishing in the pricing.
Posted By: Diane Haensel on Nov 11, 2012 11:28PMReply
I am looking for the read me or user manual for this program I downloaded through the HBT site. Is a manual available and I am overlooking it or is it online somewhere? TIA for any direction you folks have.
Posted By: Robert Beckett on Oct 16, 2012 05:27PM Category: Front Panel Designer
Front Panel Designer has an online help menu. You will be able to access it as soon as you have installed the software.
I am sorry for the late response. Please let me know if you have any further question. Our forum is the perfect platform to discuss questions about Front Panel Designer or our machining service more in detail.
Posted By: Diane Haensel on Oct 28, 2012 03:49PMReply
Would it be possible to add a feature where I can import a file in some format (for example, comma-separated value table) that contains X,Y coordinates for holes? Many panels I design require fairly a large number of holes and the possibility of making a mistake goes up when manually entering them.
Ideally, I'd like to see the ability to read in a CSV table that has X,Y locations and hole attributes (diameter, threaded, countersunk) and the software will add these holes to the current design.
Posted By: Jim George on Oct 15, 2012 06:48PM Category: Whishes
Let me discuss this with our software developers.
However, have you tried the dxf import? Front Panel Designer offers two different dxf file imports. One for the shape of the panel (outer perimeter) and the other for objects placed on the panel.
The outer shape can be defined in the object properties of the front panel when you start a new project. The other is called "free contour" and can be found in the toolbar.
You can import complex hole patterns with "free contour" very easily.
I hope this helps in the meantime or might be even a better way to import your design in Front Panel Designer.
Posted By: Diane Haensel on Oct 28, 2012 04:02PMReply
Hi, I am a new user of front panel design and find it very usefull. I have few questions as follows:-
1- I want to know if you ship the order to Saudi Arabia?
2- I have designed two panels and i want to place a logo (TIF format) on the designed panels. Do i have to send you the logo file and mark the placement position of the logo on the design(s)
Posted By: Uzair Ahmed on Sep 29, 2012 09:52AM Category: Ordering
Thank you for checking out Front Panel Designer.
Yes we ship to Saudi Arabia.
Logos can only be imported as vector graphic (hpgl file in plt format). As the graphics are engraved on the plates and not printed, a few characteristics in the generating of HPGL files need to be considered to obtain optimal results. Take a look at our tips on how to make engraveable HPGL files.
You can also send us your logo in tif format and have us convert it for you. We charge 180USD per logo from bitmap to engraveable vector.
We are looking forward to seeing your front panel design.
Posted By: Diane Haensel on Oct 03, 2012 02:14AMReply
Does anyone have a cutout template for a D-SUB 9 connector. I tried using the rectangular cutout, adding 10-degree corners but it is clearly not correct. Thanks.
Posted By: John Lauf on Sep 27, 2012 12:34AM Category: Front Panel Designer
We have this cutout in our macro object library.
You can activate the side bar under 'View'-->'Macro Objects'. There you will find a folder named 'SubD-Connector' and the cutout for the 9-pole connector.
Just drag and drop it on your front panel design. It comes grouped with the drill holes but each object can be changed individually after you ungrouped it.
Posted By: Diane Haensel on Sep 28, 2012 01:34AMReply
Thanks very much Diane, I figured there must be a library somewhere but didn't try the 'Macro Objects'. Much appreciated.
Posted By: John Lauf on Sep 28, 2012 02:05AMReply