hi, i have a black panel...and i would like to write black text on top of a white box on the panel.
ive made a white box. and the black text. but how do i choose which is going to be printed on top of the other? ie. so how do i choose which goes to the forefront ..where is the "foreground"..."background" setting for the box and text. At the moment i am unable to bring the text to the front. i would not want the panel to come back and there be a blank white box there wit the text hidden underneath
Posted By: Black Out on Aug 18, 2012 05:59PM Category: Front Panel Designer
Graphics in Front Panel Designer work a little different than in other design software.
You can't define layers since the images are not printed. All engravings are on the same layer and you would need to isolate the text from the background with a lip. This ensures that the infill paint of each area doesn't run into an other.
Our logo is a good example for it. Click here to have a look. The letters are embossed and show the aluminum color. Only the background is engraved and infilled with paint.
The last image on this page shows white infilled letters (the word Danger) on a red background. The associated hpgl design includes a lip between the red and white infill area.
More info about hpgl design can be found here.
Please let me know if you need help with your design. We offer a hpgl design service.
Posted By: Diane Haensel on Aug 20, 2012 07:58PMReply
I was wondering if it is possible to get the housing profiles in something other then Natural or Black anodized?
In my upcoming project I am looking at creating an internal box within the main enclosure. The main enclosure will be black, but I was thinking of making the internal box out of gold anodize paneling. I will be using two Housing Profile#1's as part of this internal box. It would be great if they too could be gold anodize to match the panels. Is this possible? And if so, what would be the extra cost?
Posted By: Michael St. Pierre on Aug 17, 2012 07:17AM Category: Production
Unfortunately we don't have an in-house anodizing process. The raw material of the housing and side profiles comes only in black and natural.
We can powder-coat the profiles for you but it wouldn't match gold anodized aluminum.
Thank you for inquiry. I will check with our supplier and see if this is something we can implement in the future.
Posted By: Diane Haensel on Aug 17, 2012 10:23PMReply
I have an older partial panel that I would like to replace as is. Could I just send that partial panel in to you and have you make me one just like it?
Posted By: Rolf Grandstaff on Aug 14, 2012 03:15PM Category: Front Panel Designer
Yes you can send the partial panel in to us and have us design the Front Panel Designer file for you. We charge an hourly fee of $80 for this service.
Posted By: Diane Haensel on Aug 17, 2012 10:03PMReply
Hi all I do a front panel via Adobe Illustrator and I would want to import in FrontDesign for factoring.
It seems to be not possible !!! does anyone have an experience for Importing ?
Thanks by advance
Posted By: Ritchie Ritchie on Aug 08, 2012 05:59PM Category: Front Panel Designer
You can import dxf and hpgl files.
The hpgl import (file extension plt) is for engravings but can be also used as a design layer to compare your existing Adobe Illustrator file to Front Panel Designer. Check out our tutorial about hpgl imports
I hope that helps.
Posted By: Diane Haensel on Aug 09, 2012 02:18AMReply
I typed in the outside corner radii, yet they did not stay in the entry boxes nor did they appear on the screen.
I loaded a design from two years ago and the corners show on it.
The previous design used 1.5mm anodized (which I see is no longer available).
I have searched help and the forum yet cannot find an answer.
Does anyone know why is this happening?
Posted By: Kenneth Saylor on Jul 30, 2012 04:14PM Category: Front Panel Designer
I don't know why this is happening. It shouldn't because we didn't make any changes related to corner radii. Also, 1.5mm anodized is still available.
Can you please send us both fpd files to email@example.com, the old and the new file? I would like to have a look and find out what went wrong. Do you run Front Panel Designer on Windows? If not please let me know what exe file you downloaded. This should narrow it down for me.
I am sorry for the inconvenience and will get back to you as soon as I can have a look at the files.
Posted By: Diane Haensel on Jul 30, 2012 04:46PMReply
I was able to duplicate this problem. What happens to me is I can select the value that is in the box, and then type in a new value such as .25, but when I leave this box and select something else it reverts back to whatever value was in there originally. there are two different work-arounds for this problem. First one is to type 0.25 instead of just .25. The other is to place the cursor at the far right decimal place and back space over what is there and enter a new value. Both fixes seem to work fine.
this problem seems to be consistently present in pretty much all the places you can change a value (i.e.; X and Y position, ect.)
I am running the Linux version of Front Panel Designer, so I don't know if this is the same in either the Windows or Mac versions.
Posted By: Michael St. Pierre on Jul 31, 2012 12:38AMReply
Thank you for your detailed error report. I was able to duplicate the problem with the Windows version.
The reason is the missing zero when you type .25. The code of Front Panel Designer comes from Europe and it is not common over there to skip the zero, it is always 0.25. I already reported this to our IT department and it should be fixed with the next version.
Posted By: Diane Haensel on Aug 02, 2012 09:46PMReply
I'm glad that this will get addressed. I remember it really gave me problems when I was first using the program. But now I've gotten pretty used to it (I'll just have unlearn what I do automatically now). It will of course be good to have this work correctly for any new users of the program, and it will speed things up for me as well.
Thanks for listening.
Edit: BTW, the bug is more then just leaving out the zero preceding the decimal point. Here's something to try...
Select an item such as an existing hole in the panel,then press "M", and with the mouse highlight a single digit in either the "X" or the "Y". Now enter a new number other then zero and select "OK". 10 times out of 10, that number will be changed to zero, instead of what you entered.
Posted By: Michael St. Pierre on Aug 09, 2012 07:32AMReply
Hmm, I was not able to duplicate the "mouse-highlight issue" on Windows. I will add it to my bug report and let our IT people try it on Linux.
Thank you again for pointing this out.
Posted By: Diane Haensel on Aug 11, 2012 01:14AMReply
Hi - can you help me with a design question. I am designing a button plate for a steering wheel and one of the components to be mounted on the back face of the plate is a display board (led's, lcd's). I have a template but am not confident I can get the exact dimensions and distances between the led lights for the cut outs. Thing is you have already made a button plate for another customer with the same cut out as he is using the same display board I want to use. I would upload the template picture but there is no option for me to do that I have attached an image of the actual board below. I believe your American division manufactured the plate so is there any way you can check with them to see if they have any documentation regarding the actual dimensions. If you could enquire that would be a real help.
If there is a contact address I can send the .dwg to you for the board if that helps
Posted By: Simon Hedditch on Jul 17, 2012 02:45AM Category: Front Panel Designer
We can certainly help you with the design. Please email the .dwg to firstname.lastname@example.org to my attention.
Posted By: Diane Haensel on Jul 17, 2012 03:05AMReply
Hi Diane - thank you. e-mail sent!
Posted By: Simon Hedditch on Jul 18, 2012 09:03PMReply
Hi Diane - thank you. e-mail sent!
Posted By: Simon Hedditch on Jul 18, 2012 09:14PMReply
Hi Diane - any news?
Posted By: Simon Hedditch on Jul 23, 2012 04:47PMReply