Support Forum

  • test


    Posted By: Diane Haensel on Jun 14, 2010 07:46PM Category: Production

  • Sharing Templates/Objects

    I can just imagin there are alot of diffrent user made objects out on everybodys computers? It would be nice if we could all chare them threw the software or maybe here on the site in a libary?

    Posted By: Henrik Rydell on May 20, 2010 04:00PM Category: Whishes

  • Bergues - Einbaubuchse

    Is the Bergues - Einbaubuchse a standard AC Inlet? It doesn't look exactly right and I don't know how to get the dimensions of the macro object to check.

    Posted By: Chris Rowlett on May 18, 2010 04:16PM Category: Front Panel Designer

  • Found 3 bugs

    Bug #1: Your 'Search' in this forum does not work. If you click on the search icon in the upper right corner of this forum it will dump you to a blank page.


    Bug #2: Where is the 8-32 tap? In the Drill Hole Properties dialog -> Thread -> UNC (Unified Coarse). The drop down list does not have a selection for #8-32. There is a selection for #8-24, which I assume is a typo as I can not find this size on any tap/drill chart.


    Bug #3: Reference point of an object doesn't seem to work. Place three holes on a panel. Group all holes. Double Click the group to bring up the Group Properties dialog. Redefine the reference point of the group, either by clicking one of the corner radio buttons to the left or by selecting the reference point of an object. The 'new' reference point of the group turns red in the dialog and the 'new' cross hairs of the group reference point appear on the front panel, but you can't do anything with the 'new' group reference point.


    For example, if I made the center point of one of the three holes in my group the 'new' reference point of the group and then try to align it to the horizontal and verical center of the panel, it moves the group with respect to the center point of the GROUP to the new location, instead of moving the group with respect to the center point of the referenced HOLE to the new location. It's as though the group center is ALWAYS the reference point, regardless of where the 'new' reference point is defined in the group.

    Posted By: DAVE DAVIS on May 07, 2010 02:35AM Category: Front Panel Designer

  • Unified screw thread...



    I am laying out a panel and have chosen to use an 8-32 screw for mounting a device to it. However, there are only 8-24 and 8-36 options available in the software.


    Is this a bug? My charts show no 8-24 and McMaster-Carr does not supply that thread size. If i select 8-24 threads will I end up with 8-32?


    Thanks in advance,


    Posted By: Landon Solomon on May 05, 2010 04:24PM Category: Production

  • Front Panel Designer 4.0 Crashes



    After running Front Panel Designer 4.0 installation, I find that anytime I try to modify a panel created in 3.5 version the 4.0 application crashes.


    This is a repeatable crash that happens everytime I try making changes. I have tried this on another PC and get the same problem.


    I am running Windows 7, 64 bit on an HP Pavilion computer.


    Here is the application crash information as reported by Windows:


    Problem signature:

    Problem Event Name: APPCRASH

    Application Name: FrontDesign.exe

    Application Version:

    Application Timestamp: 4bb3c019

    Fault Module Name: FrontDesign.exe

    Fault Module Version:

    Fault Module Timestamp: 4bb3c019

    Exception Code: c0000005

    Exception Offset: 00024f0a

    OS Version: 6.1.7600.

    Locale ID: 1033

    Additional Information 1: 0a9e

    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789

    Additional Information 3: 0a9e

    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789




    Is there a fix for this problem?





    Posted By: Ted Jolly on Apr 24, 2010 04:45AM Category: Front Panel Designer

Please enter your message:

* = required field

Facebook Linked In Youtube Google+