Support Forum
-
Correct "Macro Object" for D series neutrik connectors?
Hi, Could you please tell me the correct macro object for a D series neutrik connector punch out with countersunk M3 machine screws.
Thanks
TomPosted By: Tom on Sep 23, 2016 06:12AM Category: Front Panel Designer
-
Can't install on an ipad
Trying to install on an iPad running os10.01 which is the most current OS that will install. The iPad is brand new. When I download the file simply won't open. I've got an unzip program which supports any file including this one.
Any ideas?Posted By: Mark Detrixhe on Sep 20, 2016 10:21PM Category: Front Panel Designer
Hello Mark,
Our designer software can only be downloaded and used on these operating systems:
Mac OS X Intel
Linux (Debian/Ubuntu) 32bit
Linux (Debian/Ubuntu) 64bit
Linux (Fedora/openSUSE) 32bit
Linux (Fedora/openSUSE) 64bit
Linux 32bit
Linux 64bit
We do not have it available for use on the Ipad platform.Posted By: Adrian on Sep 21, 2016 12:24AM
ReplyThanks for the quick reply. I'll go grab a laptop!
Posted By: Mark Detrixhe on Sep 21, 2016 01:12AM
ReplyThanks Fabian My marco tool bar is only
a thin line and un attached. It will not attach
and remain only a line. Any Ideas??
Thanks GaryPosted By: gary barnett on Sep 06, 2016 10:24PM
Reply -
Tapped holes
I have ordered presently and in the past several panels with tapped holes in the 6-32, 8-32, and 10-32 range. I have noticed that I have consistently had to run my own tap through the holes to get the screws to go in without extra force. I specify the hole as the instructions say by selecting the screw size. Am I missing something? I have used both stainless steel and aluminum hardware.
Posted By: Robert on Aug 04, 2016 04:13PM Category: Front Panel Designer
Hi Robert.
If you would like increase the diameter opening of the thread so it isn't as tight click on the 'manual thread parameters' in the bottom of the properties window and increase the diameter by .1mm or .004"
This should give you enough tolerance so you can insert your screws.Posted By: Adrian on Aug 09, 2016 08:43PM
ReplyWell, my argument to that solution is
1) Why does the program not select the proper drill size?
2) Why would the tap used not clean out the and the re-tap I used did?Posted By: Robert on Aug 09, 2016 09:06PM
ReplyWe use routers with threaded end mills so the tolerances are on the low end to prevent screw loosening over time and this doesn't seem to be a problem with the majority of our customers. We do not hand thread these and we use a plug thread go/no-go gauge to double check the threads as well. If you need more clarification let us know.
Posted By: Adrian on Aug 10, 2016 01:54AM
Reply -
Importing DXF drops small holes
DXF has 0.067" (#51 drill) in it but importing drops those holes.
Posted By: Mark on Jul 12, 2016 05:14PM Category: Front Panel Designer
-
How create a new macro objets
Hi, some one can tell me how I can create a macro objets of mini-USB and micro-USB connector?
RegardsPosted By: Wilmer on Jun 28, 2016 11:51PM Category: Front Panel Designer
Hi Wilmer,
We have instructions on 'how to create a macro' in our HELP page from the Front Panel Designer. Just click on Help in the Menu Bar of the Front Panel Designer then click on Help... again.
This will bring up the attached dialogue box. Enter 'macro object' in the search bar and the topics on macros will populate. Under 'creating macros' you will find instructions on how to create a macro.
Please don't hesitate to contact our customer service in case you need further assistance.
Kind regards,
FabianAttached File: macros.png
Posted By: Fabian on Jun 30, 2016 06:25PM
Reply
