I am looking for the read me or user manual for this program I downloaded through the HBT site. Is a manual available and I am overlooking it or is it online somewhere? TIA for any direction you folks have.
Posted By: Robert Beckett on Oct 16, 2012 05:27PM Category: Front Panel Designer
Front Panel Designer has an online help menu. You will be able to access it as soon as you have installed the software.
I am sorry for the late response. Please let me know if you have any further question. Our forum is the perfect platform to discuss questions about Front Panel Designer or our machining service more in detail.
Posted By: Diane Haensel on Oct 28, 2012 03:49PMReply
Would it be possible to add a feature where I can import a file in some format (for example, comma-separated value table) that contains X,Y coordinates for holes? Many panels I design require fairly a large number of holes and the possibility of making a mistake goes up when manually entering them.
Ideally, I'd like to see the ability to read in a CSV table that has X,Y locations and hole attributes (diameter, threaded, countersunk) and the software will add these holes to the current design.
Posted By: Jim George on Oct 15, 2012 06:48PM Category: Whishes
Let me discuss this with our software developers.
However, have you tried the dxf import? Front Panel Designer offers two different dxf file imports. One for the shape of the panel (outer perimeter) and the other for objects placed on the panel.
The outer shape can be defined in the object properties of the front panel when you start a new project. The other is called "free contour" and can be found in the toolbar.
You can import complex hole patterns with "free contour" very easily.
I hope this helps in the meantime or might be even a better way to import your design in Front Panel Designer.
Posted By: Diane Haensel on Oct 28, 2012 04:02PMReply
Hi, I am a new user of front panel design and find it very usefull. I have few questions as follows:-
1- I want to know if you ship the order to Saudi Arabia?
2- I have designed two panels and i want to place a logo (TIF format) on the designed panels. Do i have to send you the logo file and mark the placement position of the logo on the design(s)
Posted By: Uzair Ahmed on Sep 29, 2012 09:52AM Category: Ordering
Thank you for checking out Front Panel Designer.
Yes we ship to Saudi Arabia.
Logos can only be imported as vector graphic (hpgl file in plt format). As the graphics are engraved on the plates and not printed, a few characteristics in the generating of HPGL files need to be considered to obtain optimal results. Take a look at our tips on how to make engraveable HPGL files.
You can also send us your logo in tif format and have us convert it for you. We charge 180USD per logo from bitmap to engraveable vector.
We are looking forward to seeing your front panel design.
Posted By: Diane Haensel on Oct 03, 2012 02:14AMReply
Does anyone have a cutout template for a D-SUB 9 connector. I tried using the rectangular cutout, adding 10-degree corners but it is clearly not correct. Thanks.
Posted By: John Lauf on Sep 27, 2012 12:34AM Category: Front Panel Designer
We have this cutout in our macro object library.
You can activate the side bar under 'View'-->'Macro Objects'. There you will find a folder named 'SubD-Connector' and the cutout for the 9-pole connector.
Just drag and drop it on your front panel design. It comes grouped with the drill holes but each object can be changed individually after you ungrouped it.
Posted By: Diane Haensel on Sep 28, 2012 01:34AMReply
Thanks very much Diane, I figured there must be a library somewhere but didn't try the 'Macro Objects'. Much appreciated.
Posted By: John Lauf on Sep 28, 2012 02:05AMReply
I am designing a 6RU 19" rack panel. When I add the system holes, four holes appear in the four corners of the panel but I need to add more standard size rack holes on each side. Generally, a 6RU rack panel has four holes on each side and not just two. Ideas on how to add these?
Posted By: Paul Christensen on Sep 10, 2012 01:52PM Category: Front Panel Designer
Front Panel Designer lets you choose from two rack mount panel system suppliers, Schroff and Fischer. Both have two mounting holes on each side of a 6U panel. The additional drill holes are for the handles.
However, you can copy or move everything that is on your design. Those system holes are a template and you can even delete parts of it.
Let me know what spacing you need between the holes. I can help you with the design.
Posted By: Diane Haensel on Sep 11, 2012 02:03AMReply
That worked well. I now have the extra rack holes added.
My rack panel is nearly complete. I did notice that one of my 3" holes will not exactly center in line with the other three. It's off by about one pixel and no amount of movement will get it on the exact center line with the other holes. Does the software have a "snap to" function like some other CADD programs? If not, I'll just start over by deleting, then addding. Many thanks!
Posted By: Paul Christensen on Sep 11, 2012 01:48PMReply
There is a snap on function for new placed objects. But I recommend to activate the 'Object Properties' window. You can find it in the toolbar under 'View'
This will show you all relevant info of an object once selected. The first two entries in the object properties show you the X and Y coordinates. Those can be edited and allow you to align everything to each other perfectly.
Posted By: Diane Haensel on Sep 11, 2012 07:45PMReply
That fixed it perfectly.
One other nagging question. Under panel properties, I have selected a 6RU height standard rack size. I thought that a EIA standard 6RU rack is precisely 19" wide by 10.5" in height. But when selecting the program's pre-determined 6RU height, the panel dimensions are 19.0157" wide and 10.4665" in height. Sure, just a fraction off but is there a reason for this discrepancy? Thanks!
Posted By: Paul Christensen on Sep 12, 2012 03:00PMReply
I believe this may be a correct answer to the question as it relates to EIA RU height, but not the 19" width discrepancy:
"Typically, a piece of equipment being installed has a front panel height 1⁄32 inch (0.031 inches / 0.787 millimetres) less than the allotted number of "Us." Thus, a 1U rackmount computer is not 1.75 inches (44.5 mm) tall but is 1.719 inches (43.7 mm) tall. 2U would be 3.469 inches (88.1 mm) instead of 3.5 inches (88.9 mm). This gap allows a bit of room above and below an installed piece of equipment so it may be removed without binding on the adjacent equipment."
Posted By: Paul Christensen on Sep 13, 2012 02:09AMReply
I just recently received an order for an enclosure using the housing profiles. Everything appeared to be excellent until I flip the panels over and noticed everything from scratches to rub marks. In most cases this turned out not to be a problem. However on an inner enclosed area to save money, I did the cavities on the front side, thinking I could simply flip them over when I assembled it. Well luckily I had opted to use counter sunk screws on the outer main panels, so this required that I did the cavities on the reverse side, thus saving the day.
Anyway I've had panels made before and never noticed such poor quality on the back side, nor have I seen anything mentioned about it in the FAQs or on this forum. Has something changed, or did I just get something that slipped through QC? As it turned out since this is only an issue with the flipped inner panels, it won't be apparent when the enclosure is fully assembled. But then again this was a very expensive project at nearly $1,400 and it caught me by surprise.
So I guess my bottom line question is: Are there no guarantees on the finish quality for the panel back side, and/or is there an option to specify that both sides of the panel should have a high quality finish?
Posted By: Michael St. Pierre on Sep 10, 2012 08:21AM Category: Production
Thank you for letting us know that there was a problem with your last order. Unfortunately, we cannot guarantee a high quality finish of the back side of anodized material. It is mentioned on our product site. The reason is that we only receive our raw material only with a protection film on the front side. Having both sides with a high quality finish would raise the cost dramatically and we would need to pass it on to or customers.
However, we try our best not to add additional damage to the backside during the machining process. Excessive or deep scratches on the back side lead to rejection in our QC process. So your parts must have slipped through. My apologies for that. Please feel free to contact us. I am sure we can make it up to you with your next project.
Posted By: Diane Haensel on Sep 10, 2012 08:02PMReply
Thanks for the link, and yes it shows quite clearly that the back side quality is not guaranteed.
The scratches I saw were not deep, but they are obvious, as well as what appears to be rub marks. I guess in my past projects it was just the luck of the draw that I received panels with a high quality back side finish.
No need to apologize. I just should have paid better attention when I was reading your website. Anyway it's the outside that counts, and as can be seen in the photo below the quality is superb.
Posted By: Michael St. Pierre on Sep 12, 2012 03:23PMReply