Hi! I have used FPE over the years for my production needs and I have NEVER, never ever; no matter how I export and how I prep the data- never been able to import a dxf exported from illustrator. I am trying to design some from panels for 2 new products and am completely blocked by this. I contacted support and was curtly pointed to the pdf guide, which tells me nothing about file preparation (and that I've read, and then told it would be 100$ an hour for possibly 3 hours of work to get a simple dxf outline into front panel designer.
Does anyone have a succinct set of operations to perform in order to get a simple curved outline out of illustrator and into FPE using DXF? Paying 300$ per set of outlines will be a bit steep.
Anyway here's the perpetual error:
Attached File: Screen_Shot_2018-07-23_at_3.30.29_PM.png
Posted By: Greg Francke on Jul 24, 2018 12:38AM Category: Front Panel Designer
OKAY!!! Important advice for illustrator users: if your art contains any bezier curves, go to object/path and add anchor points. Repeat this until there are enough anchor points to approximate the curve in the following step: go to object/simplify and click on 'straight lines'. Make sure preview is active to catch any potential butchery of curves. Select the outline, export as dxf (default settings work ok), and import.
Posted By: Greg Francke on Jul 24, 2018 12:50AMReply
:( the above still only works for 1 out of 2 outlines. why is this so hard?
Attached File: Screen_Shot_2018-07-23_at_5.48.32_PM.png
Posted By: Greg Francke on Jul 24, 2018 02:49AMReply
Hey Greg! Sorry this has been a frustrating process. The team is working on your issue and will be in contact with you through email soon. Thanks!
Posted By: Front Panel Express on Jul 25, 2018 12:38AM
Send your.dxf files to firstname.lastname@example.org and we will help by email.
Posted By: Adrian on Jul 25, 2018 12:41AMReply
Thank you Adrian I will send the one last file that I can't covert later today
Posted By: Greg Francke on Jul 25, 2018 03:42PMReply
hello... I have ordered dozens of panels over a dozen years... and never had this issue...
I get a pop up that says:
the current issue of front panel designer is not reacting. please close all dialog boxes and try again.
the program was running when I had a crash... it spun endlessly, so I had to force quit... now it will not open... I rebooted computer.. I dragged the old program to the trash... downloaded again... and reinstalled... still nothing... I found the Applications Support folder, but could not see any old files to delete...
I sent an email yesterday. no reply...
any help appreciated...
Posted By: jeff on May 23, 2018 05:45AM Category: Front Panel Designer
Thank you for your message. Sorry to hear that you are having issues.
We tried to Email you back yesterday to ask a couple of questions but for some reason our Emails are not going through to you. I just called you and left a message.
I wanted to give you an update. The questions that we had for you have been answered in this post and we have forwarded this information to our IT.
Posted By: Front Panel Express on May 23, 2018 07:22PMReply
I figured it out... you have to just delete the entire Front Design folder under Application Support... once you do that, and delete the actual application and reinstall, it will start back up...
thanks for the reply.
Posted By: jeff on May 23, 2018 08:14PMReply
I have this same app launch problem as Jeff in OS X 10.13.6
I designed something now I can't get back in the app to order it.
Also all the files are save w/o the file extension '.fpd' and all seem to 1k bytes in file size??
Posted By: Joe on Sep 12, 2018 11:42PMReply
Follow Jeffs instructions and see if that fixes your problem. The extension issue could be happening due to your settings. Mac OS operating systems offer you the option to not add extensions on files once downloaded or saved so that could be your issue. Turn that option 'on' so extensions are added to files.
Email us back at email@example.com if you have any more issues.
Posted By: Adrian on Sep 15, 2018 03:47AMReply
Is there a macro element I can install for a 110 power cable, like a EAC309X?
Posted By: Allen on May 15, 2018 08:41PM Category: Front Panel Designer
The fact that they have stopped producing any new 'connectors' is sad. The one thing that could save this software is a full selection of 'macro's for the connectors that most people want.
Just not likely to happen . . . .
Posted By: Charles Roberts on May 15, 2018 08:52PMReply
The pricing window is showing prices in euros. How do I get US $ pricing?
Posted By: Robert on May 11, 2018 09:33PM Category: Front Panel Designer
Do you by chance have the Schaeffer AG version of the Front Panel Designer downloaded?
That is our sister company and their version is in Euros.
You can download our version here:
If this does not work. Please feel free to call or Email us:
Posted By: Front Panel Express on May 11, 2018 09:47PMReply
choosing these xlr's to match was excruciating.
What about more description in the preferences pain. Once on the layout there is no way to reference what one you chose.right clicking preferences turned up too little information..no descriptor or hole size or anything for reference after the fact, you are left guessing. I ended up printing them all out and then using calipers to try and figure out what is what by numbering them one to 12 on a paper.. love the service but the software is real week in a lot of other areas too.
And the connector selection is so sparse i'm making most of mine up myself and its been years sins this is the same library of parts never updated.
Posted By: Chaz on May 08, 2018 04:52AM Category: Whishes